Application
Quick-installation element for efficiently mounting pipe clamps and other components to all Channels of the 41 series, suitable for double channels also.
Time saving due to pre-assembled block - replaces 2 individual parts.
Due to the force of the integrated spring, self-supporting if used for vertical channels; can however still be easily moved along the channel by hand.
To be combined with Pressix Rods PNS, grub screws, bolts and other threaded elements.
Scope of delivery
Pre-assembled.
Installation
Insert the Block into the channel; by turning the Holding Bracket by 90° to the right, the Channel Nut locks into the stop position; then tighten nut or other connecting part with torsional moment (M) of max. 40 Nm - the job is done!
Technical Data
Material: Steel, electro-galvanised.
| Min. material thickness Channel 41 [mm] | FZ * [kN] | FQ * [kN] |
|---|---|---|
| 1.5 | 4.7 | 2.0 |
| 2.0 | 5.8 | 2.0 |
| ≥ 2.5 | 5.8 | 2.0 |
Perm. load FZ * under stress of fire
| Min. material thickness Channel 41 [mm] | FWD 30 [N] | FWD 60 [N] | FWD 90 [N] | FWD 120 [N] |
|---|---|---|---|---|
| 2.0 | ≤ 850 | ≤ 430 | ≤ 250 | |
| ≥ 2.5 | ≤ 1000 | ≤ 540 | ≤ 350 | ≤ 250 |
FZ = max. permissible tensile load
FQ = max. permissible lateral force against displacing
* The load capacity of the connecting parts used is to be considered. This applies particularly under stress of fire.
= Sold by pack
-
-
PBH41 M 8
- 0.054
- 50
- 198988
- Registrati
-
-
-
PBH41 M10
- 0.0544
- 50
- 198995
- Registrati
-
-
-
PBH41 M12
- 0.054
- 50
- 199008
- Registrati
-
