Application

To be used for Fixed Point installations in combination with Mounting Kits.

For completion a Mounting Kit (with or without sound absorption) and 4 braces (Sikla threaded tubes or rods) are needed.

For professional dimensioning of these components according to fixed point loads (up to 25 kN with sound absorption or up to 35 kN without sound absorption) our staff members give advice.

The symetric construction enables absorption of axial loads in both directions. The centrically welded M16 nut offers further connection possibilities.

Scope of delivery

Complete with 4 clamping bolts and 4 nuts M16, from size 108 mm onwards with spring inserts.

Clamping bolts and spring inserts are fixed and retained to the lower part of the clamp; nuts are supplied loose.

Installation

Tighten clamping bolts equally with the torque M as mentioned in the table.

¹⁾Tightening torque for combination FP clamp with steel pipe DIN EN 10220 / normal wall thickness. For pipes with smaller wall thickness or other material, the values have to be reduced.

Technical Data

Material: Steel, all parts galvanised.