Application
In particular useful for installation in vertical channels or places of difficult access.
Further advantages:
- For all Channels of type 41, independent of the channel height.
- No getting stuck on bolt heads when sliding in the channel.
- No appearance of settlement after tightening.
Scope of delivery
Channel Nut and Spring are tightely connected.
Installation
After inserting the Speed Nut into the channel opening, it is turned to the right as far as it will go by exerting slight pressure on it; deinstallation may be effected by following the instructions on the reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
Technical Data
| M6 | M8 | M10 | M12 | |
|---|---|---|---|---|
| Tightening torque 8.8 1) [Nm] | 10 | 25 | 40 | 80 |
1) Using lower steel classes, the value are to be reduced accordingly.
| Channel thickness [mm] | M6 FZ ≤ [kN] | M8 FZ ≤ [kN] | M10 FZ ≤ [kN] | M12 FZ ≤ [kN] | M6 FQ ≤ [kN] | M8 FQ ≤ [kN] | M10 FQ ≤ [kN] | M12 FQ ≤ [kN] | |
|---|---|---|---|---|---|---|---|---|---|
| 1.5 | 3.2 | 4.7 | 4.7 | 7.5 | 0.7 | 1.8 | 2.9 | 7.5 | |
| 2.0 | 3.2 | 5.8 | 5.8 | 10 | 0.9 | 2.1 | 3.4 | 9 | |
| 2.5 | 3.2 | 5.8 | 5.8 | 11 | 1.0 | 2.6 | 4.1 | 9 | |
| 3.0 | 3.2 | 5.8 | 5.8 | 13 | 1.1 | 2.8 | 4.4 | 9 |
Note: The permissible load capacities of the channels are to be respected.
Material:
- CC-Channel Nut: Steel class, HCP;
- Spring washer: Sheet metal spring steel, rustproof.
= Sold by pack
-
- CC 41-M 6
- 0.026
- 1
- 198698
- Registrati
-
-
CC 41-M 8
- 0.0273
- 50
- 198650
- Registrati
-
-
-
CC 41-M10
- 0.026
- 50
- 186284
- Registrati
-
-
-
CC 41-M12
- 0.06
- 50
- 110015
- Registrati
-
