Application

Plug-in component designed to create an endplate at the open end of a Beam Section TP F 100, TP F 100/160 or a Cantilever bracket AK F 100. Variation types F 100-80 (E) are designed to combine F 100 with F 80 beam sections; at the same time F 100/160 (E) are designed to combine F 100 with F 100/160 beam sections. Octagonal insert allows full utilisation of beam section within the space required by the End Support STA itself.

Installation

Depending on the situation, different options are recommended:

a) With 2x4 Self Forming Screws FLS when used to connect 2 Beam Sections; the Beam Section TP F 100/160 connected to the End Support STA F 100 - 100/160 has to be screwed with 8 Self Forming Screws FLS F. On each of the broader sides 4 Self Forming Screws FLS F are necessary.

b) With 4 Self Forming Screws FLS applied to the octagonal insert and 2 suitable wall anchors/fixings when connected to the building structure.

The Beam Section TP F 100/100 connected to the End Support STA F 100 has to be screwed with 4 Self Forming Screws FLS F. On each of the opposite sides 2 Self Forming Screws FLS F are necessary.

Technical Data

Approvals

CE mark, according to EN 1090.