Flex Frame FXR Gruppo 1562  

Application
An ideal solution to fix photovoltaic (PV) panels onto flat or shallow sloping roofs. The Flex-frame allows for easily adjustable angle range of 20° to 45°.
Channel solts can be used to easily locate the fixings required to fix down the base frame to a suitable base material.

Scope of delivery
Two flex-frames equipped with speed nuts. Frames are delivered flat in pairs, to reduce storage space. Flange Screws SCR FLA M10 x 25 to be ordered separately.

Installation
Adjust the Flex-frames to the required angle and press the ends of the frame inside to form an overlap. Use the integrated scale ruler as a means of fine adjustment for the correct angle/height of frame. Fix the overlap at the required position into the pre-installed Speed Nuts by using two Flange Screws SCR FLA.

Technical Data
Nominal load per mounting rail providing
distance from top rail to apex of frame < 80 mm:   ≤ 2.0 kN
Material:                                                                          Steel 1.0350, galvanised strip to DIN EN 10327,
                                                                                          surface coating HCP

Type Length L [mm] W
[kg]
Pack.
[pair]
Part
number
FXR 1000 1000 6.90 1 196472
FXR 1375 1375 9.60 1 194102