Application
For universal use anchor heavy loads, even in areas not cracked concrete. Recommended for anchoring pipes, profiles, shelves and support plates.
Features:
- It does not require special equipment;
- Narrow depth of drilling;
- Wide range of sizes and offers a safe and economical solution to every need;
Blunt head for inserting percussion facilitated. Pre-assembled nut and washer
Scope of delivery
Supplied with washer and hexagonal nut fitted.
Installation
1. Drill with the tip bit to a depth fixed and clean the hole;
2. Insert the anchor into the hole through the fixture;
3. Tighten the nut with a torque wrench (tightening the pair is shown in table);
Be careful to follow these instructions.
Technical Data
Material: Steel electro-galvanized (stainless steel expansion band)
Type | M8 | M10 | M12 |
---|---|---|---|
Adm. load (traction) C20/25 [kN] | 5,7 | 7,6 | 12,6 |
Adm. load (shear) C20/25 [kN] | 6,3 | 8,0 | 14,3 |
Max bending moment 1 [Nm] | 13,1 | 25,7 | 44,6 |
Min tickness material d [mm] | 100 | 100 | 130 |
Span scr ≥ [mm] | 132 | 144 | 195 |
Distance from the edge ccr [mm] | 66 | 72 | 97,5 |
Min span smin [mm] | 40 | 55 | 75 |
Min distance from the edgecmin [mm] | 45 | 65 | 90 |
ø tip [mm] | 8 | 10 | 12 |
Depth insertion hv ≥ [mm] | 44 | 48 | 65 |
Torque Md [Nm] | 15 | 30 | 50 |
Tipo | Attacco | Lunghezza totale [mm] | Max fissabile tfix [mm] |
---|---|---|---|
M8/10/75 | M8 | 75 | 10,0 |
M8/20/85 | M8 | 85 | 20 |
M10/10/85 | M10 | 85 | 10 |
M10/20/95 | M10 | 95 | 20 |
M10/30/105 | M10 | 105 | 30 |
M10/45/120 | M10 | 120 | 45 |
M12/13/95 | M12 | 95 | 13 |
M12/15/110 | M12 | 110 | 15 |
M12/50/145 |
M12 | 145 | 50 |
Approvals
CE-ETA, Option 7 for non-cracked concrete. Certificate to the fire. Approved FM from M10 to M12.
Tipo | Kg | Pezzi per confezione | Codice Articolo |
---|---|---|---|
M10/10 /85 mm | 0.04 | 100 | 501603 |
M 8/10/ 75 mm | 0.03 | 100 | 500242 |
M 8/10/ 75 mm | 0.03 | 100 | 500244 |
M 8/20/ 85 mm | 0.04 | 100 | 500246 |
M10/10 /85 mm | 0.04 | 50 | 500252 |
M10/20/ 95 mm | 0.04 | 50 | 500254 |
M10/30/105 mm | 0.06 | 50 | 500255 |
M10/45/120 mm | 0.07 | 50 | 500256 |
M12/13/ 95 mm | 0.1 | 25 | 500261 |
M12/15/110 mm | 0.1 | 25 | 500263 |
M12/50/145 mm | 0.12 | 25 | 500266 |
-
- M10/10 /85 mm
- 0.04
- 100
- 501603
- Registrati
-
- M 8/10/ 75 mm
- 0.03
- 100
- 500242
- Registrati
-
- M 8/10/ 75 mm
- 0.03
- 100
- 500244
- Registrati
-
- M 8/20/ 85 mm
- 0.04
- 100
- 500246
- Registrati
-
- M10/10 /85 mm
- 0.04
- 50
- 500252
- Registrati
-
- M10/20/ 95 mm
- 0.04
- 50
- 500254
- Registrati
-
- M10/30/105 mm
- 0.06
- 50
- 500255
- Registrati
-
- M10/45/120 mm
- 0.07
- 50
- 500256
- Registrati
-
- M12/13/ 95 mm
- 0.1
- 25
- 500261
- Registrati
-
- M12/15/110 mm
- 0.1
- 25
- 500263
- Registrati
-
- M12/50/145 mm
- 0.12
- 25
- 500266
- Registrati