Application
Plug-in component designed to create an endplate at the open end of a Beam Section TP F80 or a Cantilever bracket AK F80. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible.
Installation
Depending on the version, following mountings solutions are possible:
a) With 2x4 Self Forming Screws FLS when used to connect 2 Beam Sections;
b) With 4 Self Forming Screws FLS applied to the octagonal insert and 2 suitable wall anchors/fixings when connected to the building structure.
The Beam Section TP F 80/80 connected to the End Support STA F 80 has to be screwed with 4 Self Forming Screws FLS F. On each of the opposite sides 2 Self Forming Screws FLS F are necessary.
Technical Data
| Type | Dimensions of Base plate [mm] | A [mm] | B [mm] | H [mm] |
|---|---|---|---|---|
| STA F 80 | 190 x 80 x 8 | 14 | 20 x 11 | 148 |
| STA F 80-E | 165 x 80 x 8 | - | 20 x 11 | 148 |
Configuration: Base plate welded to octagonal element F 80
Material:
- Plate: Steel, HCP;
- Octagonal element: Steel, HCP.
Approvals
CE mark, according to EN 1090.
= Sold by pack
-
- STA F 80
- 1.6
- 1
- 192856
- Registrati
-
- STA F 80
- 1.08
- 1
- 117160
- Registrati
-
- STA F 80-E
- 1.5
- 1
- 192863
- Registrati
