Application
Interface element to connect 90° intersecting Beam Sections F80 or F 80/30. Alternatively the Beam Section Holder TPH may be used to connect only one beam section to an even surface with suitable wall anchors or with cast-in channel accessories.
Installation
Connecting one Beam Section F80 or F 80/30 90° to another one by using 6 x Self Forming Screw FLS applied through all elongated holes. Connecting to any other surface or member by using 2 x Self Forming Screws FLS through the two elongated holes on the top of the Beam Section Holder TPH F80 plus 2 appropriate fixing elements up to M12 through the two holes “d1”.
Technical Data
Type | L x w x th [mm] | ø d1 [mm] | Elongated hole LL1 d x a [mm] | Elongated hole LL2 d x a [mm] | Perm. load under 90° to the beam axis Fy = Fz [kN] |
---|---|---|---|---|---|
TPH F 80 | 181 x 50 x 4 | 13 | 11 x 20 | - | 7 |
TPH F 80 C | 199 x 80 x 4 | 14 | 11 x 20 | 11 x 20 | 10 |
Material: Steel, HCP or hot dipped galvanised.
= Sold by pack
Type
kg
Pack.
Avail.
Art.Cod.
Price
Q.ty