Application
Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section.
Installation
1.Position Beam Clip with the split end on beam section.
2.Install support plate and HR trimming and tighten accordingly.
The support plate secures a rectangular assembly of the bolt and prevents its shifting or bending stress. In conjunction with the HR trimming a continuous and predictable preload force is guaranteed.
Technical Data
| Type | Size range [mm] |
Tightening torque MA [Nm] |
Fy permitted per Beam Clip [kN] |
Shear force load capacity Fz per set = 4 Beam Clips [kN] |
| M12 S | 1 - 30 | 85 | 26,3 | 12,0* |
| M16 S | 4 - 40 | 150 | 32,0 | 13,6* |
* The specified data relate to the worst case with flange thicknesses 30 mnm (M12) or 40 mm (M16) as well as a coefficient of adhesion µadhesion = 0,20.
A possibly operating tensile force Fy isn't included.
Material: steel, HCP.
Scope of delivery
| Type | Beam Clip [Quantity] |
Support plate [Quantity] |
HR trimming * [Quantity] |
| M12 S | 4 x M12 | 4 x M12 | 4 x M12 x 80 |
| M16 S | 4 x M16 | 4 x M16 | 4 x M16 x 100 |
| M12 S2 | 2 x M12 | 2 x M12 | 2 x M12 x 80 |
* HR trimming according EN 14399-3 consisting of: Hexagon bolt M12 or M16, 2 washers, 1 hexagon nut
= Sold by pack
-
- 1.2
- 10
- 115843
- Registrati
-
- M12 MA S
- 1.6
- 10
- 114886
- Registrati
-
- 2.2
- 10
- 115844
- Registrati
-
- 0.6
- 10
- 115845
- Registrati
