BEAM SECTION HOLDER TPH F 100

BEAM SECTION HOLDER TPH F 100

Application

Interface element to connect 90° intersecting Beam Sections F100. Alternatively the Beam Section Holder TPH may be used to connect only one beam section to an even surface with suitable wall anchors or with cast-in channel accessories.

 

Installation

Connecting one Beam Section F100 90° to another one by using 6 x Self Forming Screw FLS applied through all elongated holes. Connecting to any other surface or member by using 2 x Self Forming Screws FLS through the two elongated holes on the top of the Beam Section Holder TPH F100 plus 2 appropriate fixing elements up to M12 through the two holes “d1”.

 

Technical Data

TypeL x b x s
[mm]
ø d1
[mm]
Elongated hole LL1
d x a [mm]
Elongated hole LL2
d x a [mm]
TPH F 100 C 219 x 100 x 4 14 11 x 20 11 x 20
TPH F 100/80 C 199 x 100 x 4 14 11 x 20 11 x 20

Material: Steel, HCP.

BEAM SECTION HOLDER TPH F 100
BEAM SECTION HOLDER TPH F 100
Code Name Weight Number of pieces
113084 TPH F 100 C 1.24 10 Information request
113085 TPH F 100/80 C 1.09 10 Information request