DUCTING CLAMP PLU 2G-N WITH LINING

DUCTING CLAMP PLU 2G-N WITH LINING

Download PDF
Information request

Application

Two-piece pipe clamp for simple installation of spiral-seam ducts.

Suitable for soundproof installation according to DIN 4109.

 

Scope of delivery

Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging.

 

Installation

Tighten upper part of the pipe clamp without the interfering lower part.

Hook lower part, provided with a keyhole, into the fixed clamping bolt (see picture).

After inserting the pipe and locating into the pivot screw, the clamping bolt head is located behind the angled profiles; then tighten clamping bolt with max. 2 Nm.

 

Technical Data

Material: Steel, galvanised;

Insulation insert:   SBR/EPDM black (see section "RUBBER PROFILE SAL SBR/EPDM" for technical data).


 

Type Material
[mm]		 Perm. load capacity
[kN]		 Thread
connection
71 - 200 20 x 1.5 0.8 M8/M10
224 - 500 25 x 1.5 1.0 M8/M10

 

DUCTING CLAMP PLU 2G-N WITH LINING
DUCTING CLAMP PLU 2G-N WITH LINING
Code Name Weight Number of pieces
199824 DN 71 0.10 - Information request
199831 DN 80 0.12 - Information request
199848 DN 90 0.12 - Information request
199855 DN 100 0.14 - Information request
199862 DN 112 0.15 - Information request
199879 DN 125 0.16 - Information request
199886 DN 140 0.17 - Information request
199893 DN 150 0.19 - Information request
199909 DN 160 0.19 - Information request
199916 DN 180 0.21 - Information request
199923 DN 200 0.23 - Information request
199930 DN 224 0.31 - Information request
199947 DN 250 0.37 - Information request
199954 DN 280 0.36 - Information request
199961 DN 300 0.38 - Information request
199978 DN 315 0.42 - Information request
199985 DN 355 0.46 - Information request
199992 DN 400 0.52 - Information request
199993 DN 450 0.58 - Information request
199994 DN 500 0.64 - Information request