DUCTING CLAMP PLU 2G-N

DUCTING CLAMP PLU 2G-N

Download PDF
Information request

Application

Two-piece pipe clamp for simple installation of spiral-seam ducts.

 

Scope of delivery

Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging.

 

Installation

Tighten upper part of the pipe clamp without the interfering lower part.

Hook the lower part, provided with a keyhole, into the fixed clamping bolt (see picture). After mounting of the pipe and locating into the pivot screw, the clamping bolt is fixed behind the bending; then tighten clamping bolt with max. 2 Nm.

 

Technical Data

Material: Steel, galvanised.

 

Type Material
[mm]		 Perm. load capacity
[kN]		 Thread
connection
71 - 200 20 x 1.5 0.8 M8/M10
224 - 500 25 x 1.5 1.0 M8/M10

 

DUCTING CLAMP PLU 2G-N
DUCTING CLAMP PLU 2G-N
Code Name Weight Number of pieces
199626 DN 71 0.09 - Information request
199633 DN 80 0.10 - Information request
199640 DN 90 0.10 - Information request
199657 DN 100 0.11 - Information request
199664 DN 112 0.12 - Information request
199671 DN 125 0.13 - Information request
199688 DN 140 0.14 - Information request
199695 DN 150 0.15 - Information request
199701 DN 160 0.16 - Information request
199718 DN 180 0.17 - Information request
199725 DN 200 0.18 - Information request
199732 DN 224 0.24 - Information request
199749 DN 250 0.25 - Information request
199756 DN 280 0.29 - Information request
199763 DN 300 0.32 - Information request
199770 DN 315 0.32 - Information request
199787 DN 355 0.37 - Information request
199794 DN 400 0.41 - Information request
199800 DN 450 0.43 - Information request
199817 DN 500 0.50 - Information request