BEAM CLIP P
Application
Universal clamping element for bi-lateral attachment of crossbars for pipe runs, ducts, cable lines and equipment to steel beams.
The maximum clamping range may be extended by up to 10 mm by using spacers. Any thicker spacers should be welded to the crossbar.
Installation
Determination of the required bolt length Lmin:
| Type | Arrangement A | Arrangement B |
|---|---|---|
| P1 | Lmin = a + b + 37 [mm] | Lmin = b + 40 [mm] |
Arrangement A Arrangement B
Pass-through bolt
with holding bracket Channel nut HZ
P 1: Lmin = a + b + 37 [mm] P 1: Lmin = b + 40 [mm]
Technical Data
Max. working load: 4 kN
Max tightening torque
Bolt: M8 or M10 ± 10%: 50 Nm
Material: Cast iron or steel.
| Tipo | b [mm] | ø D [mm] | L [mm] | B [mm] |
|---|---|---|---|---|
| P 1 | 1 - 23 | 11 | 50 | 36 |
| Code | Name | Weight | Number of pieces | ||
|---|---|---|---|---|---|
| 116196 | P1 Ø 11 mm | 0.09 | 50 | Information request |