TERMINAL ATTACK ATT

Application

Hook fastening terminal for PV modules to be attached to aluminum. Available in aluminum or stainless steel. The height of the modules must be between 34 and 50 mm (range covered by different measures, see table).

 

Scope of delivery

Attack with nut with a hammer and screw spring TCE, fully assembled.

 

Installation

Place the hook in the position of the module installed, then attach the hook by pulling the bolt with a maximum torque of 15 Nm. Tighten the tensioner bolt to use a screwdriver with insert for screw 6 mm Allen.

 

Technical Data

Automatic locking against any slipping of the module up to 1.5 kN for the hook.

Material:

- Attack: 6060 aluminum alloy or stainless steel A2;

- Screw and nut hammer: AISI 304 stainless steel (galvanized steel fasteners on request);

- Spring: stainless steel.

Dimensions:

- Attack: A: 16 mm, B: 42 mm, C: 13 mm, D: 60 mm

- Hammer nut: 13 mm x 35 mm x 7 mm

TERMINAL ATTACK ATT
Code Name Weight Number of pieces
182789AL ATT 36-40 mm alluminio - - Information request