SPEED NUT NT CC 41 SS
Application
In particular useful when installing in vertical channels or in places of difficult access.
Further advantages:
- For all Channels of type 41, independent of the height of the channel;
- No getting stuck on bolt heads when sliding in the channel;
- No appearance of settlement after tightening.
Scope of delivery
Channel Nut and Spring are tightely connected.
Installation
After inserting the Speed Nut into the channel opening, it is - by exerting slight pressure on it - turned to the right as far as it will go; deinstallation may be effected by following the instructions in reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
Technical Data
| M6 | M8 | M10 | |
|---|---|---|---|
| Tightening torque [Nm] | 10 | 25 | 40 |
| Material thickness channel [mm] | M6 FZ ≤ [kN] | M8 FZ ≤ [kN] | M10 FZ ≤ [kN] | M6 FQ ≤ [kN] | M8 FQ ≤ [kN] | M10 FQ ≤ [kN] | |
|---|---|---|---|---|---|---|---|
| 2.0 | 3.2 | 5.8 | 5.8 | 0.9 | 2.1 | 3.4 | |
| 2.5 | 3.2 | 5.8 | 5.8 | 1.0 | 2.6 | 4.1 |
Note: The admissible load capacities of the channels are to be taken into account.
Material:
- Nut: Stainless steel 316 (A4);
- Spring: Sheet metal spring steel, rustproof.
| Code | Name | Weight | Number of pieces | ||
|---|---|---|---|---|---|
| 199299 | CC 41-M 6 A4 | 0.03 | 50 | Information request | |
| 199305 | CC 41-M 8 A4 | 0.03 | 50 | Information request | |
| 199312 | CC 41-M10 A4 | 0.03 | 50 | Information request |