END SUPPORT WBD HCP

END SUPPORT WBD HCP

Download PDF
Information request

Application

In combination with a channel, End Support WBD is particularly suitable for setting up structures attached to walls, floors and ceilings and in particular as a base for frame structures made of channels.

The generous dimensions and the rhomib shape of the mounting plate provide for a high bending moment and safely stabilise lateral loads.

 

Installation

Normally, two anchors grouped opposite to each other and along the load axis are sufficient. Only in exceptional cases (e.g. high props in frameworks) four anchors are required.

Tighening torque for hexagon bolts ≥ 40 Nm.

For ceiling mounting under high loads (up to 7.0 kN), we recommend the use of at least one fully traversing bolt for connecting the channel to the End Support WBD (for examples see "Installation Guidelines").

 

Technical Data

TypeSuitable for
channel		A
[mm]		s
[mm]		B
[mm]		b
[mm]		h
[mm]		C
[mm]
41/21-31 41/21/2.0 - 41/31/2.0 135 6 100 25 11 95
41/41-45 41/41/2.5 135 6 100 25 11 95
41/41-45 D 41/41/2.5 D 210 8 170 25 13 125

Working load for Wall mounting:

See tables on load charts for End Support WBD in chapter "Brackets"

The figures apply on walls if two anchors of the load class as stated are used.

 

Working load for Ceiling mounting:

The permissible maximum vertical load for ceiling mounting with Holding Bracket amounts to 2.0 kN. Using at least one traversing bolt (class 8.8) 7.0 kN.

 

Material:Steel, HCP.




 

END SUPPORT WBD HCP
END SUPPORT WBD HCP
Code Name Weight Number of pieces
198063 WBD 41/21 0.73 - Information request
198070 WBD 41/41 0.83 - Information request
113918 WBD 41/41 1.50 - Information request
198100 WBD 41/41 D 2.46 - Information request