Application

In combination with a channel, End Support WBD is particularly suitable

- for setting up support structures attached to walls, floors and ceilings;

- in particular as a base for frame structures made of channels.

The generous dimensions and the rhomib shape of the mounting plate provide for a high bending moment and safely stabilise lateral loads.

Installation

Normally, two bolts grouped opposite to each other and along the load axis are sufficient. Only in exceptional cases (e.g. high props in frameworks) four bolts are required.

Minimum torque values for the hexagon bolts of the 41 Holding Brackets are:

For ceiling mounting under high loads (up to 7.0 kN), we recommend the use of at least one fully traversing bolt for connecting the channel to the End Support WBD (for examples see "Installation Guideline").

Technical Data

Material: Steel, cold-formed, electro-galvanised.

Working load for Wall mounting:

See tables on the following pages. The figures apply on walls if two bolts of the load class as stated are used.

END SUPPORT WBD 41/21

END SUPPORT WBD 41/41

END SUPPORT WBD 41/62

END SUPPORT WBD 41-75/75

Working load for Ceiling Mounting:

The permissible maximum vertical load for ceiling mounting structures fixed by way of at least one traversing bolt (class 8.8) amounts to 7.0 kN

For End Supports WBD for single channels, the following values apply subject to the condition that all included accessories are assembled correctly.